Welcome!

Discussion about anything rocketry related or not.
mdutch
Posts: 72
Joined: Mon Nov 09, 2015 4:01 pm

Re: Welcome!

Postby mdutch » Tue Nov 10, 2015 7:26 am

2 cents.
Mike Dutch
URRG & MRSI Founder
TAP L3CC
"I just want to fly ROCKETS"

PGagnon
Posts: 40
Joined: Mon Nov 09, 2015 5:49 pm

Re: Welcome!

Postby PGagnon » Tue Nov 10, 2015 8:14 am

Your greed is showing. Now how about more of your best buy info. Like " I tried CSRocketrys ACME curative and worked well with a 1.9% . less is more."

Black Sunshine
Posts: 3
Joined: Tue Nov 10, 2015 12:48 pm

Re: Welcome!

Postby Black Sunshine » Tue Nov 10, 2015 12:50 pm

I'm in...

Black Sunshine
Posts: 3
Joined: Tue Nov 10, 2015 12:48 pm

Re: Welcome!

Postby Black Sunshine » Tue Nov 10, 2015 12:58 pm

ACME curative good, yes? I was hoping someone in our group had tried it.

User avatar
patelldp
Posts: 160
Joined: Thu Nov 05, 2015 5:07 pm
Location: New York

Re: Welcome!

Postby patelldp » Tue Nov 10, 2015 1:12 pm

Feel free to start a thread about the ACME curative in the Research forum!
Dan Patell
TRA 10904 L3

PGagnon
Posts: 40
Joined: Mon Nov 09, 2015 5:49 pm

Re: Welcome!

Postby PGagnon » Wed Nov 11, 2015 7:14 pm

OK Dan. I have tried the Acme and as Chris said, it is a little faster than E-744 but not much. I have only made 1 test batch using 1.9% to 16% binder where as I was using 2.5% of E-744 for the same results.

PGagnon
Posts: 40
Joined: Mon Nov 09, 2015 5:49 pm

Re: Welcome!

Postby PGagnon » Wed Nov 11, 2015 7:56 pm

A note on modifying your favorite formula. First off, Stop thinking that everything must equal 100%. Think of this being a recipe. you know,
a dash of this and a dash of that. If your formula has X amount of FE203 don't add more FE203. This can LOWER your ISP. Instead add a little CUO.
If you want to slow it down, Add up to 3% Oximide and this will not lower your ISP like Ammonium Chloride or a carbonate. Also consider your
particle size, Smaller is faster and larger is slower. This all an addition to your existing formula. For safety make your additions in small steps.
Good luck.

rharshberger
Posts: 3
Joined: Fri Nov 06, 2015 7:10 pm

Re: Welcome!

Postby rharshberger » Fri Nov 13, 2015 2:32 am

Newbies everywhere, even me!

cwbullet
Posts: 2
Joined: Tue Nov 17, 2015 10:45 am

Re: Welcome!

Postby cwbullet » Tue Nov 17, 2015 10:46 am

Thanks Dan..

User avatar
patelldp
Posts: 160
Joined: Thu Nov 05, 2015 5:07 pm
Location: New York

Re: Welcome!

Postby patelldp » Tue Nov 17, 2015 10:47 am

cwbullet wrote:Thanks Dan..


No, thank you for joining! It's been lonely around here while I got this up and running...hopefully some good content comes from increased membership!
Dan Patell
TRA 10904 L3


Return to “Break Room”

Who is online

Users browsing this forum: No registered users and 1 guest