I have a lot of overlap for 54mm rockets. Looking to pass this Intimidator 3 off to a good home that will clean it up and send it skyward again. This is the Performance Rocketry version of the rocket, not the new Wildman.
Information can be found here: http://www.wildmanrocketry.com/ProductD ... oduct=2118
Nosecone is a "Proline" cone from an older Mongoose...it's graphite infused gel-coat with a metal tip
Upper tube is Profusion tubing from a Dominator 3
Coupler is a 6" long Hawk tube
Rocket has a 3" to 54mm Aeropack tailcone
Booster has a short coupler with an aluminum bulkhead for a shock cord attachment. Rocket is capped out at a 54/2550.
I am including a 3D printed mobius camera shroud and a 3d printed altimeter sled.
I'll include some 9/16" TN for the drogue and main events.
Lots of gadgets included here. The sled is a custom unit from Andrew Diehl that will accept an RRC2+ or an ARTS altimeter. I have an ARTS1 altimeter and cable that would be for sale as well if you're interested, I'd need to make sure that it works.
The kit retails for $230 (OUCH!!!!!!!!), Aeropack is $44, Shroud is $20, sled is $20, and we can ignore the cone and tube differences...so new retail is $314.
I'm asking $130 cash for all of the above, delivered to the April URRG launch. If you're interested and want me to ship it, I'd really only be interested in doing so if the buyer pays actual shipping.
Buy and sell rocketry items!
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests